08/13/14 ~ Rayerbazar Mobile
Rayerbazar Mobile Apps For Android Phone
Rayerbazar Mobile Any Password Protected File Post... Go This Link For Password and Search Dont Mind Friend
.::Shohag Mobile Technology::. Rayerbazar, Dhaka-1209. All Kinds OF Mobile Solution HERE....... iPhone, Samsung, Nokia, Blackberry, LG Flash & Unlock Email-shohag.proyes@yahoo.com Mobile No.+8801618405155
Attention Please:



"
All My Sweet Friends When any File download Please Read Full Information then Download File ( All Flash File Full Free No Need Cost "Thanks" )

13 August 2014

Nokia Lumia 710 / 800 / 800C TP BOOT REPAIR Solution Here

The solution described below is for phones with "un-alligned" or corrupted AMSS + ADSP Region caused by improper custom firmware flashing or by other means of data corruption.

Here is sample logs showing the error during Normal USB Flashing:


================================================== ======
Sending OSBL Certificate HASH: C72DBA3ABED42215584093FA9DE247381D6062B4
Certificate Size: 452 Bytes

ERROR: Data Rejected at SEQ 0x3
Status : WRITE OSBL CERTIFICATE FAILED
==============================================


STEP 1:

In order to fix this problem, you first need to write QUALCOMM OSBL to your phone via TP Method.

Select Correct Phone Type and make sure M.B.R. + SEC_BOOT + OSBL QCOM is selected as well. Then click REPAIR BOOT!!!





STEP 2:
Remove USB Cable and press and hold POWER BUTTON for 18 Seconds. Then press and hold VOLUME UP Button while connecting the USB Cable to the phone.

*** Your Phone should now be detected as a New HDD Device and Windows will ask you to FORMAT IT... Of course



DO NOT FORMAT


STEP 3:
Download the proper RAW BOOT Files for your phone.


Lumia 710 RM-803 and RM-809
Lumia 800 RM-801 and RM-819
Lumia 800C RM-802



STEP 4:
Go to eMMC Direct tab in ATF Software and click "Scan Partitions". If your phone is NOT DETECTED, go back to STEP 2. Repeat Step 2 until your phone is DETECTED Properly.

After ATF Software successfully Lists the Partitions Found on the Phone, click "Backup Phone Data" so you will save your IMEI, Simlocks and other important data safely.





STEP 5:
Now Let us write Boot Files which you downloaded from Step 3.
Extract the RAR file and then write the 3 RAW Boot Files 1 by 1:

5a. dbl_RM-XXX.bin <--- Write this to 0x4D - DBL Partition
5b. osbl_nokia
_RM-XXX.bin <--- Write this to 0x46 - OSBL Partition
5c. amss_adsp_RM-XXX.bin <--- Write this to 0x0C - AMSS_ADSP Partition


5a - DBL




5b - OSBL_NOKIA



5c - AMSS_ADSP



STEP 6:
Click "SP UNLOCK" if you want to unlock your phone after fixing the BOOTS.



STEP 7:
Flash the WP_OS partition using your regular ESCO Flash Files. This will have the same effect as you will flash the phone via USB... but via eMMC Direct, it is faster and does not care if your KEYSTORE is damaged or erased.

Write Flash file to 0x48 WP_OS Partition.

Flash File should be the BOOT file and should be more than 300 MB in size.

It looks like this:

RMxxx_11111_prod_111_11_
boot.esco <--- 300+ MB









*** WARNING: Everytime you flash your phone with another firmware, you will always RESET the SP Lock status and RESET the SP Lock Counters. To avoid your phone from getting RE-LOCKED, always make sure to UN-CHECK the "XXXXXXX_prod_generic_amss.esco" flash file before you click the FLASH Button. By Skipping this file, you can always re-enter "00000000" to unlock your phone again after flashing.

Walton Primo D3 Start up Logo Show Few second Then Off Solution 100% Tested

WALTON Primo D2 STARTUP LOGO FEW SECOND GOING OFF SOLUTION




Related Posts Plugin for WordPress, Blogger...

New Post Here:

 

Copyright @ 2013 Rayerbazar Mobile.