Symphony W50 Rooting Tested

Hi Guys !

I'm here with a tutorial for Rooting Symphony W50

Which many of you Guys Requested !

OK ! First things First !
I'm Not Responsible For any damage of your phone !

Lets Start -

1.Backup UR data and ROM !
- If you wanna keep all the app you currently have in your phone because all your Contacts , Massages , Apps will be removed during the process
If you wanna make a backup of those APP thn you might try some APPS to make a Backup of those files here are the name -
a) File Expert
b) Android Assistant

2.Rooting Process -

b)Download your preferred driver and Copy and paste it to your desktop and install it !
c) Driver installing Instructions -
The the driver_win_64.exe as administrator or it will fail
When it tell you to press enter - Press Enter
Now type one and press enter then there are 3 options choose your windows and type the number and press enter and you are good to go !
d) Connect the device -
Connect the device and check the Device installs successfully !

e) Now Download this Zip file https://www.dropbox.com/s/3hqk9uymdn..._v2.1121.01.7z
f) After Downloading Extract it to your Desktop !
g) Now go to Sp_Flash tool folder and run Flash_tool as administrator
h) After the program loads click on the Scatter-loading and there's and scatter file inside the SP_Flash tool folder go to SP_Flash_Tool_exe_v2.1121.01\SP_Flash_Tool_exe_v2. 1121.01\Android and select the Scatter file
i)Now tick the recovery and press on it Now find the CWM file that is in the zip file ....
j) Now turn of ur device
k) Now this is important SO Be careful .....
Click the download button on SP_FLASH_TOOL and a timer starts So connect the phone between 12 sec' ( and make sure ur phone is off ) and the process bar will complete and and it will show you a green mark that means it worked !

I have included a video of how to Work with the SP_Flash tool
here is the videos ! https://www.youtube.com/watch?v=1Y1LuRu0NRA
In case u r having trouble with Youtube !
Now open Your phone while Holding the Power Button + Volume UP and a screen appear As Clockwork-mod 5........
the screen will look like this



Now make sure to make a backup of your current ROM ! Which is easy
in the Clockwork-mod menu use the Volume keys as up and down and and the Option button as OK ! So navigate to the BACKUP AND RESTORE Option ! and select backup as shown below
and here are the button config cause ur screen will not work around here



and how to make the backup







it might take a while !
And after the backup finishes .... and show successful Disconnect the cable and power off the device .....

Now remove the SD card and Connect it to your Computer and Go to SD/Clockworkmod/ and cut the Backup folder and keep it safely on your PC !

Now Download this File clockworkmod.rar
Extract it .... And Copy the backup folder to Clockworkmod/ and put the SD in your phone,


Now again start your phone by pressing And Holding The Power Button + The Volume UP key until the Clockworkmod interface comes and now go to the Wipe data/factory setting and select Yes after that do wipe cache partition now go to Backup again and press restore and select the 2012-06-10.08.17.26 and next screen press the YES Option .. wait until it finishes and reboot the device Confused ? See screenshots below !
After Wiping Data and cache partion do this





and now selcet the 2012-06-10.08.17.26



Select yes and wait for it to be done !



Now start up the device and if it boots up fine then Congrats ! ( usually takes more time in the start time start-up )

Now download this file http://downloads.noshufou.netdna-cdn...arm-signed.zip and copy it to the SD card

Now power off your phone and go to Clockworkmod again and select install zip from SD and again select Install from SD and browse and select the Superuser.zip u have just downloaded and press OK ... again select YES and wait for it to finish and restart your phone and you will find the superuser app in the Application menu !!! here are the screen shots ! -

Install Zip from SD



Press Install Zip from SD again



and Locate the Superuser.zip u just copied to your SD



and wait for it to be finished

Read More This Post

How to Use SD Firmware Tool Guide here

[Rockchip Cpu] SD Firmware Tool and How to Use Guide

Download link;- https://www.mediafire.com/?1tlv061e35vw1p2

Guide:=
1] Download Tool
2] Open Tool
3] Select Removable Disk And Upgrade firmware As Shown In Img

4]Now Select FIrmware/Rom

5]Now Click On Create It Will Ask u To Formatt Mmc Press YES

6] Process Start

7] Done

Now Plug Your Card In Tab And Power On It To Update

Simply Press Thanks If It Help To YOU

Read More This Post

LGTOOL & SGTOOL update: news for Alcatel, Huawei!

LGTOOL
by SEtool team

Version 2.34 released!

New version highlights:
Added all-new, world's first algo for Alcatel Remote Calculator!
Added over 1Tb FW for HUAWEI phones!


DIRECT DOWNLOAD LGTOOL & SGTOOL
DOWNLOAD LGTOOL & SGTOOL FROM GOOGLE


New for LGTOOL remote services:

Alcatel 1060, 1060D, 1063, 1051A, 1051D, 1051N , 236G variants, 3116 variants,
1062, 2040G, 2040D, 2041G, 2041D, 3116N, 316 variants - World's first!

- calculate unlock codes by IMEI - Price is only 6 FREE credits or 1 paid credit


Other changes in LGtool, SGtool and remote services:

- Added 5697 files for 583 models (over 1tb!) for HUAWEI phones
- Fixed an issue with SGtool update
- HTC IMEI calc algo improved


You can view our official reseller list here. Resellers with credits available are marked as “In stock”, please contact them now to avoid disappointment.

Note:
Since v. 2.0 new license system for activated users is added. Please do not install LGtool 2.xx until you purchase LGtool license (paid activation).
New users should install v.1.99 first to register smart card.

LGTool/SGTool Official Support Forum
LGTool Official Website

Read More This Post

VRoot 1.7.0 - 1-Click Root Method mostly All andriod phone

VRoot 1.7.0 - 1-Click Root Method mostly All Android phone not matter which brand and which modal


Supported devices:lot of devices up to Android 4.x (4.0~4.3)

download this software

http://www.mediafire.com/download/v3...3690_Setup.exe

after this software will be auto update to 1.6.-

producer for install because chines language so i post all step



Next.


Don't create start menu. (as you wish)


Create desktop icon.


Finish. Uncheck if you dont want to start the rooting app now.



after this open software and connect phone(must enable usb debugging)





then click on Root during root phone will be restart

note:after root superuser will be display in English language not in chines

more shocking news on the way

Read More This Post

Blackberry 9780 0MEP Done With HXCMAGMA.

9780 0MEP Done Just in Min With HXCMAGMA
You no need anymore to change or install drivers,as HXCMAGMA will do this for you at normal conditions

More Updates On the Way Stay Connected

Read More This Post

Samsung 9082 mic way solution

samsung 9082 mic way solution

How to use 2 pin mic 

Read More This Post

Western D35i Flash file

CPU TYPE:625A

Flash ID: 00EF0040

Flash Type: SF_W25Q32BV

Chip Capacity: 0x300000(3MB)

Password:- Liton_Bkash

Download

Read More This Post

Mycell Alien SX2 Factory Firmware 100% tested Without Password

Mycell Alien SX2 Factory Firmware 100% tested

  Without Password

Download Here

Read More This Post

GDL Xtreme-1 Flash File WITHOUT PASSWORD tested by Shohag gsm

GDL Xtreme-1 Flash File WITHOUT PASSWORD tested by Shohag gsm

DOWNLOAD

WITHOUT PASSWORD

Read More This Post

Western D20 Flash File

Western D20



CPU Name:MSW853XB

Flash ID:0x00C22537

Flash Name:MACRONIX_MX25U6435E/F

Flash Size:0x00800000 -> 8M

Password:- Liton@01719357702

 Download

Read More This Post

Western d25 flash fileTested

western d25 flash fileTested

http://www.ziddu.com/download/20333188/westernd25.rar.html

Read More This Post

Western D50 Flash File 100% tested

western D50.rar - 4shared.com - online file sharing and storage - download - Dipankor-ctg

Read More This Post

Find Charging Pin With Volcano Box

Read More This Post

HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano(Tested On SPD 6531)

HOW TO MAKE Easy Cable RJ45 To USB converter For Volcano(Tested On SPD 6531)

Requirement
(1)usb cable NOKIA 5130
(2)any RJ45 Cable
(3)Iron
(4)Solding Wire

first remove usb jig FROM USB CABLE and sold with any rj45 cable All five wire .volcano box will detect auto pin D+ D-


MAKE THIS TYPE EASY CABLE OTHER JIGS AND TEST IT WITH VOLCANO BOX AND SHEAR HERE YOUR EXPERIENCE
VIDEO LINK
Easy Cable RJ45 To USB converter For Volcano - Download - 4shared
http://www.4shared.com/rar/BC2UC61N/...B_convert.html




rj45 tx rx find to easy .
but rj45 usb D+ D- how to do
pls clear which rj45 8pin use usb 5 pin.

Read More This Post

SPD 6531 & All Spd imei Write With New Magic Usb Cable

Spd6531 & All Spd imei Write With New Magic Usb Cable


HOW TO MAKE SPD IMEI WRITE Cable - only disconnect usb + supply (vcc) your cable is ready

















Write imei usb disconnect usb + supply (vcc)
usb cable connect only D+ D- GND
1-go to spd tab
2-R/W IMEI chooses com
3-untick auto detect pinout
4-press these key from keybord to enable imei alt+ctrl+i
5-click on write imei
6-click run
7-new window will be open
8-choose usb NOT SELECT ANY COM PORT
9-write imei in box
10-insert usb cable in mobile without battery
11-click on write imei
12- then insert battery, no need press any boot key and wait 10 secnd
imei write successfully

Read More This Post

[Tutorial] How to write IMEI in All SPD Phones having P-05b Connector

How to write IMEI with VolcanoBox

in All SPD Phones having P-05b Connector



Before Repairing IMEI, User must follow these -

User must have Win Xp (Service Pack 3) for best results
Install Correct Drivers for your handset.
If you dont have correct driver, then download from below links -


SPD Android Usb Driver for win7/win8 (64bits)

SPD Android Usb Driver for winXP/win7 (32bits)

SC6530/6531/6610 New Usb Driver for win7/win8 (64bits)

SC6530/6531/6610 New Usb Driver for winXP/win7 (32bits)


Now Make These Settings -

* Go to Detect tab & Select [D+/D-]SPD/Anyka in Detect Type.

* Manually put pinouts (Pin2= D- Pin3= D+ Pin5= GND) as given below -




* After putting pins like this, Connect Handset on Volcano Main Cable.

* Attach Power cables also & Press "Set Pinout" button.

* After Pinouts Setting Complete, Remove Cable from Box Socket (Dont Remove Cables from Handset)
See in pic below -





Now do as stated here -

Code:

Step 1 - Open Volcano tool and go to spd tab and (Enable IMEI Option)
Step 2 - Tick "Write IMEI" and Untick "Auto-detect pinouts"
Step 3 - Set R/W IMEI to "COM" and press RUN Button(New Tool will Open)
Step 4 - Select "USB" in ComP and Fill IMEI in boxes.
Step 5 - Press "Write IMEI" button
Step 6 - Now Connect the cable back to the BOX.
Step 7 - wait for 2-3 minutes..you see message "Write IMEI done".

>>> See here video Tutorial <<<

Read More This Post

Easy Work with Android modified Cable

Android modifide Cable
use this cable, no need press any boot key in any spd,mtk android and many other phones


insert this usb cable(switch off with battery) and see in device manager,your mobile is connected


1-VCC
2-D-
3-D+
4- EMPTY IN CA101 NOKIA USB CABLE
5 GND


JOINT GND TO EMPTY POINT OR TWO WIRE SOLDERING, IF YOU JOINT BOTH WIRE YOUR CABLE IS MODIFIDE CABLE,IF DISSCONNECTED YOUR CABLE IS NORMAL CA101 CABLE


joint this empty point to gnd in ca 101 nokia usb cable













how to use the cable for read write flash or write imei


read write flash


1- open volcano
2-select spd tab and coreect boot acording to your phone cpu 6600,6610,6800,6820,6530
3-tick any option read,write,format
4-untick auto detact pinout
5-insert this usb cable
6-see in device manager com port
7 -com port automaticly refresh in volcano software(if not refresh automaticly please refresh or select manuly)
8-run

Read More This Post