[Tutorial] How to write IMEI in All SPD Phones having P-05b Connector

How to write IMEI with VolcanoBox

in All SPD Phones having P-05b Connector



Before Repairing IMEI, User must follow these -

User must have Win Xp (Service Pack 3) for best results
Install Correct Drivers for your handset.
If you dont have correct driver, then download from below links -


SPD Android Usb Driver for win7/win8 (64bits)

SPD Android Usb Driver for winXP/win7 (32bits)

SC6530/6531/6610 New Usb Driver for win7/win8 (64bits)

SC6530/6531/6610 New Usb Driver for winXP/win7 (32bits)


Now Make These Settings -

* Go to Detect tab & Select [D+/D-]SPD/Anyka in Detect Type.

* Manually put pinouts (Pin2= D- Pin3= D+ Pin5= GND) as given below -




* After putting pins like this, Connect Handset on Volcano Main Cable.

* Attach Power cables also & Press "Set Pinout" button.

* After Pinouts Setting Complete, Remove Cable from Box Socket (Dont Remove Cables from Handset)
See in pic below -





Now do as stated here -

Code:

Step 1 - Open Volcano tool and go to spd tab and (Enable IMEI Option)
Step 2 - Tick "Write IMEI" and Untick "Auto-detect pinouts"
Step 3 - Set R/W IMEI to "COM" and press RUN Button(New Tool will Open)
Step 4 - Select "USB" in ComP and Fill IMEI in boxes.
Step 5 - Press "Write IMEI" button
Step 6 - Now Connect the cable back to the BOX.
Step 7 - wait for 2-3 minutes..you see message "Write IMEI done".

>>> See here video Tutorial <<<